Nick's Equipment Sales
5389 Egremont Rd. RR2
Wyoming, Ontario, Canada  N0N 1T0
Toll Free (800)-387-2224
(519)-899-2566 or Fax (519) 899-4268
E-Mail - njonkman@xcelco.on.ca

Scroll Saw Blades
and Scroll Saw Accessories

All Prices are in Canadian Dollars 30% off all remaining stock we still have a good supply of most blades

For more than 75 years, Olson has been a leading manufacturer of scroll saw and band saw blades, offering an extensive line of superior blades to satisfy almost every need. Olson has led the way with many innovative products, including the introduction of Reverse Skip Tooth Blades with special reverse teeth on the end of the blade for smooth, splinter free finish on the bottom surface; PGT™ Scroll Saw Blades with reverse teeth, considered among experts as "The Best Blade Available". PGT or Precision Ground Tooth blades are made with a new, exclusive production process that makes these blades the fastest, most accurate cutting, and longest lasting blades you can buy. And most recently, Thick Wood Reverse Tooth Blades with only 5 teeth per inch and extra wide gullets for rapid cutting of material up to 2" thick, and now, NEW for 98 the "CROWN TOOTH" blade.

Olson Blade Holder Conversion Kit. Blade holder conversion kit for 16" scroll saws sold by Sears Craftsman. Dremel models 1671, & 1695 and Ryobi single speed SC160. Allows for quicker blade changing when using straight blades and allows you to use pinned blades as well. Includes special fixture for holding lower blade holder clamp that simplifies plain end blade installation. KIT # AC49610 $40.35 each sold out

Blade holder Fixture included in kit.

Momentary On/Off Foot Switch For use with scroll saws, drill presses, or other stationary power tools you may want to turn on and off without having to reach for the power switch. Rated 1/4 HP, 10 Amp. 110/130V. 3 prong grounded plug. #FS70020 - $42.00 each sold out

Precision Ground Tooth (PGT™) Scroll Saw Blades The new Precision Ground Tooth (PGT™) Scroll Saw Blades are "The Best" blades available! Tested and endorsed by experts, PGT Blades outperform, and outlast all other blades. Their razor sharp teeth cut faster, smoother, and most important, more accurately. Their design minimizes burning, and they last up to 3 - 4 times as long as other blades.
			Exaggerated view of rough edge of regular blades. PGT™ is ground perfectly flat both sides.

*OLSON PGT™ Skip Reverse Tooth SCROLL SAW BLADES*
Product	Univ.#	Application	Width	Thick.	TPI	Price    6	Doz.	Gross
PG455	5RG	For steady, close radius cutting in materials 3/16" or thicker	.040	.018	12 9 rev.	sold out	$11.10	$106.25
PG457	7RG	For steady, close radius cutting in materials 1/4" or thicker	.046	.018	10 7 rev.	sold out	$11.10	$106.25
PG459	9RG	For fast, close radius cutting in materials 1/2" or thicker	.048	.018	8 6 rev.	sold out	$11.10	$106.25

*OLSON PGT™ Double Reverse Tooth SCROLL SAW BLADES*
Product	Univ.#	Application	Width	Thick.	TPI	Price    6	Doz.	Gross
PG495	5RG	For accurate, tight radius cutting in materials 3/16" or thicker	.045	.018	12 8 rev.	sold out	$11.10	$106.25
PG497	7RG	For steady, close radius cutting in materials 1/4" or thicker	.047	.018	10.5 8 rev.	sold out	$11.10	$106.25
PG499	9RG	For fast, close radius cutting in materials 1/2" or thicker	.048	.018	9 6 rev.	sold out	$11.10	$106.25

OLSON "CROWN TOOTH" SCROLL SAW BLADE Just when we thought we had seen it all with the new PGT™ blade from OLSON, they have introducing yet another first, the "CROWN TOOTH" scroll saw blade. This blade is destined to be the most popular blade of them all. It cuts in both the up and down stroke, keeping the kerf cleaner and thus reducing the heat created by the blade, which should spell longer blade life, and faster cutting. There will be a little more blade lift, but not much different than a reverse tooth blade would have. This will also solve the problem those of you had, with the reverse tooth not reaching high enough.

*OLSON "CROWN TOOTH" SCROLL SAW BLADES*
Product	Univ.#	Application	Width	Thick.	TPI	Doz.	1/2 Gross	Gross
CT622	2	For tight radius work 3/32" to 1/2" thick.	.026"	.013"	20	sold out
CT623	3	For tight radius work 3/32" to 1/2" thick.	.032"	.014"	16	sold out
CT632	12	Thick wood.	.065"	.024"	6	sold out

*REVERSE SKIP TOOTH* 5" LONG PLAIN END
Product	Univ.#	Application	Width	Thick.	TPI	Doz.	Gross
FR440R	2/0R	For material 1/4" + or stacks of 1/8".	.026	.011	28	sold out
FR443R	2R	For smooth splinter free finish in frett work.	.029	.012	20	sold out
FR446R	5R	For smooth splinter free finish top & bottom.	.038	.016	12.5	$650 3 dz. left
FR448R	7R	on hard and soft woods, plywood etc.	.047	.017	11.5	sold out
FR450R	9R	on hard and soft woods, plywood etc.	.054	.019	11.5	$6.50 5 dz. left
FR453R	12R	on hard and soft woods, plywood etc.	.062	.024	9.5	sold out
FR420R		Medium Fine	.100	.022	9	$6.50 1 dz. left

*DOUBLE TOOTH FRET SAW BLADE* 5" LONG PLAIN END
Product	Univ.#	Application	Width	Thick.	TPI	Doz.	Gross
DT435	3	For tight radius work in thin materials 3/32" to 1/2"   wood veneer, wood, bone, fiber, plastic etc.	.032	.014	23	$5.80 1 dz. left
DT436	5	For close radius cutting in materials 1/8" or thicker Great for sawing hard/soft wood, bone, horn, plastic etc.	.038	.016	16	$5.80 3 dz. left
DT437	7	Popular sizes for cutting hard and soft woods 3/16" up to 2". Also cuts plastic, paper, felt, bone etc.	.044	.018	13	sold out
DT438	9		.053	.018	11	$5.80 3 dz. left
DT439	12		.061	.022	10	$5.80 2 dz. left

*SKIP TOOTH FRET SAW BLADES* 5" LONG PLAIN END
Product	Univ.#	Application	Width	Thick.	TPI	Doz.	Gross
FR440	2/0	For extremely intricate sawing. For very thin cuts in material 1/16" to 1/4". Great for wood veneer, plastics, hard rubber etc.	.022	.010	28	sold out
FR441	0		.024	.011	25	sold out
FR443	2	For tight radius work in thin materials 3/32" to 1/2" wood veneer, wood, bone, fiber, plastics etc.	.029	.012	20	$6.50 7 dz. left
FR445	4		.035	.015	15	$6.50 3 dz. left
FR447	6	Great for sawing hard/soft wood, bone, horn, plastic.	.041	.016	12.5	sold out
FR448	7	Popular sizes for cutting hard and soft woods 3/16" up to 2". Also cuts plastic, paper, felt, bone etc.	.045	.017	11.5	sold out
FR450	9		.053	.018	11.5	$6.50 5 dz. left
FR453	12		.059	.019	9.5	$6.50 2 dz. left
FR409		Wood and Plastic	.090	.022	7	sold out
FR410		Wood and Plastic	.110	.022	7	sold out
Special Thin Blades
FR423		Wood, Plastics, for extremely thin cuts on thin materials 3/32" to 1/2" thick.	.080	.010	14	$6.20 4 dz. left
FR424			.070	.010	18.5	$6.20 3 dz. left
FR425			.070	.014	18.5
This bottom group is very flexible and care must be taken to give them time to cut or they will twist with your turn.

*SCROLL SAW BLADES* 5" LONG PLAIN END These blades are ideal for those older spring tension saws such as Delta 24", Powermatic 24", Sprunger, Shopsmith etc.
Product	Univ.#	Application	Width	Thick.	TPI	Doz.	Gross
SC402		SC402 Hard and soft wood from 3/32" to 1/4" thick.	.049	.022	25	$6.20 4 dz. left
SC403	y		.070	.023	20	sold out
SC405			.110	.022	20	$6.20 4 dz. left
SC406		Mica, iron, steel, lead, copper, brass, aluminum, pewter, etc.	.250	.028	20	sold out
SC411		Wallboard, pressed wood, wood, felt, paper, bone,lead etc.	.110	.022	15	$6.20 2 dz. left
SC412		Hard and soft wood from 1/4" to 3/4" thick.	.110	.022	10	$6.20 4 dz. left
SC413			.187	.025	10	$6.20 1 dz. left
SC414			.250	.028	7	$6.20 2 dz. left

* SCROLL SAW BLADES · 6"* LONG · PLAIN END These blades are for similar saws as above but requiring a 6" blade or having a stroke over 1 1/4".
Product	Univ.#	Application	Width	Thick.	TPI	Doz.	Gross
SC405-6		Hard and soft wood	.110	.022	20	sold out
SC411-6	y	Wallboard, wood, bone, etc.	.110	.022	15	sold out
SC412-6		Hard / soft wood, and plastic.	.110	.022	10	sold out
SC413-6			.187	.025	10	sold out

* SPIRAL SAW BLADES * 5" LONG · PLAIN ENDS *
Product	Univ.#	Application	Width	Thick.	TPI	Doz.	Gross
SP461	0	Omni-directional .	.032	y	46	sold out
SP463	2	Omni-directional .	.035		41	$6.50 3 dz. left
SP465	4	Omni-directional .	.041		36	$6.50 2 dz. left
SP466	5	Omni-directional .	.047		36	$6.50 2 dz. left
SP467	6	Omni-directional .	.051		30	$6.50 2 dz. left

* PINNED SCROLL SAW BLADES * 5" BETWEEN PINS *
Product	Style	Application	Width	Thick.	TPI	Doz.	Gross
FR424P	Skip	Wood, plastic, for extremely fine cuts on material 3/32" to 1/2" thick.	.070	.010	18.5	sold	out
FR425P	Skip		.070	.014	18.5	sold	out
FR427P	Reg.		.070	.018	25	sold	out
FR420RP	Skip	With reverse teeth, smooth splinter free cutting	.100	.018	9	sold	out
FR410P	Hook	New hook tooth for aggressive cutting up to 2" thick	.100	.018	7	$7.20 6 dz. left
SC405P	Reg.	Hard/Soft wood, plastic, wallboard, pressed wood, wood, felt, bone etc.	.110	.018	20	sold	out
SC411P	Reg.		.110	.018	15	sold	out
SC412P	Reg.	Hard/Soft wood, Plastic.	.110	.018	10	sold	out

* FLAT END SPIRAL SAW BLADES * 5"LONG * These are the same spiral blades as above except these have flat ends for easier blade installation and retention. Offered in the two most popular sizes.
Product	Style	Application	Width	Thick.	TPI	Doz.	Gross
SP468	Spiral	Medium speed and medium rough finish cutting of hard and soft wood, etc.	.035	.035	41	sold out
SP469	Spiral		.041	.041	36	sold out