Nick's Equipment Sales
5389 Egremont Rd. RR2
Wyoming, Ontario, Canada  N0N 1T0
Toll Free (800)-387-2224
(519)-899-2566 or Fax (519) 899-4268
E-Mail - njonkman@xcelco.on.ca

 

  *NOTE   Business Closing
After 30+ years in business we have closed our store
as of Dec.1, 2008.
We have moved our left over inventory to the house
and will continue to offer these via our
web site untill sold out. Most of the inventory has been
discounted as noted for each item

We will continue to offer our surface sander kit , mop
sanders and mortising machine kits and related supplies
for the fore-seeable future as well as Evapo-Rust
at our regular prices.

 


 All Prices are in Canadian Dollars

Our clamping page features some very unique clamping devices that you will not likely find elsewhere as well some old standards. Unique are our new HD Ratcheting Clamps which also feature a hand screw. These take over where the common ratcheting clamps fail to apply enough pressure. Also unique are our new Cam Bar Clamps. You have seen similar clamps elsewhere but ours are different. Ours has a "T" Track on the top of it which allows for a host of new and unique uses. There is a Router Sled that will ride on this track allowing for accurate and controlled routing of Dados, Rabets and Slots etc. A stop is available to fit the "T" track as well as a series of different jaws to fit the clamp to give it wider capabilities. Another is our new unique and innovative "V" Head Bar Clamp.

 
7" woodworking vice

Woodworking Vice

7" wide Woodworking Vice
A really nice vice with
quick release at a great price
8" opening

WWV-7 : $67.40
Can. funds
30% discount on above

New
9" wide Woodworking Vice
as above 9" opening
SM-44033 : $139.80

13" wide Woodworking Vice
as above 9" opening
SM-44034 : $169.80

Canadian Funds.
All above sold out

 Deep pipe clamps

Deep Pipe Clamp
7" Deep 3/4" Pipe Clamp
Fits 3/4" pipe not included

SM-50160
$29.80 Can. funds 
sold out

 V head bar clamps

 Our New "V" Head Bar Clamps
V-Shaped double jaw clamp head allows
clamping between points. Clamp can
also stand upright on it's three points.
The three point pressure helps keep
glue-ups from walking or shifting.

SM-50260 : 12" - $19.80 each Can.
SM-50262 : 20" - $25.80 each Can.
SM-50264 : 32" - $29.80 each Can.
above sold out

 Edge clamp

Edge Clamp

SM-50140 - $31.80 - Can. 

30% discount
current stock

sold out

 Band clamp

 Quick Adjust Band Clamp
* Exerts even pressure o work pieces
of various shapes and sizes.
* 12 ft. 6 in. nylon band.
* Clamps odd shapes with or without braces
* Braces are recessed to protect mitered corners
* Equally effective on small narrow pieces as
large or wide pieces.

SM-50060- $11.00 - Can.

30% discount

 Miter vice

 4" Picture Frame Miter Vise
* Designed for picture framers for
perfect 90 degree joints.
* Use wherever accuracy and
precision are critical.
* Clamp stock up to 4" wide
for nailing or gluing

SM-44040 - $66.80 - Can.

Sold out

Ratcheting clamp  8" Ratcheting Clamp
* All metal ratchet
* Swivel pads

SM-50130 - $7.20 - Can.
30 % discount
 HD ratcheting clap Heavy Duty Ratchet Clamps
Most ratcheting clamps fail to give
enough pressure on the work piece.
Our new ratchet clamp also features
a hand screw to give that last bit
of tightening required for the job.
Also can be used as spreader.

SM-50270 -  8"  - $15.80
SM-50274 - 12" - $17.00
SM-50276 - 18" - $17.80
SM-50278 - 24" - $19.00
SM-50280 - 30" - $19.80
SM-50282 - 36" - $21.80
sold out
Can. funds
Hold-down bolts 

 Hold-Down Bolts
Flat cushion tip
Complete with flanged washers and nuts

SM-50850 - small 1/4"- $1.80 each
SM-50853 - med. 5/16" - $2.35 each
Can. funds

 

 Push-Pull Toggle Clamp
These excellent toggle clamps are
imported and are a great bargain.

SM-50844
300 lb cap.
Push-pull Toggle Clamp - $11.60 each
Can. Funds 

Sold out

 

  Push-Pull Toggle Clamp
Extra Heavy Duty
These excellent toggle clamps are
imported and are a great bargain.

SM-50845
500 lb cap.
Push-pull Toggle Clamp - $13.20 each
Can. Funds

Sold Out 

 

 Vertical Toggle Hold-Down Clamps
This is another one of those indispensable
items for making jigs.
We keep two sizes in stock.


SM-50825 - 200 lb. small Toggle - $9.80 each
SM-50827 - 500 lb. med. Toggle - $11.80 each
SM-50828 - 500 lb. long beam - $13.25 each
Can. Funds

Sold Out

     T-Handle
Vertical Toggle Hold-Down Clamps
This is another one of those indispensable
items for making jigs.


SM-50820 - 200 lb. small Toggle - $9.80 each
Can. Funds

Sold Out
 

  Toggle Hold-Down Clamps
This is another one of those indispensable
items for making jigs.
We keep two sizes in stock.

 Toggle Hold-Down Clamps
This is another one of those indispensable
items for making jigs.
We keep two sizes in stock.

SM-50835 - 200 lb. small Toggle - $9.80 each
SM-50837 - 500 lb. med. Toggle - $11.80 each
Can. Funds

Sold Out

 Universal hold-down
Universal Hold-down

 U-Hold-38 - Universal Hold-downs
With 3/8" Bolt & K-38 Knob - $9.45 each

U-Hold-14 - Universal Hold-down
With 1/4" Bolt & "T" Knob - $8.75 each

Sold Out

 Cam clamp

Cam Clamps

This unique Cam Clamp although similar at first glance to others on the market is uniquely different. Ours features a "T" Track on the top of it which can be used for many purposes. It will allow you to use accessories shown below. Secure a 12" piece of 1x2 to the front jaw and you have a "T" square edge guide or mount your router or hand power saw on the appropriate sled and set it over the "T" Track for perfect control. There are also accessory jaws available for deeper grip or wider grip.

Available in the following sizes
MTT318 : 24" - $64.80 Can.
MTT318 : 36" - $67.50 Can.

30% discount
Current stock

 Cam clamp acc.

Cam Clamp Acc. Jaws and Stops

Deep Jaws for Cam Clamps (Blue)
MTT342 - $13.50 set Can.

Aluminum Wide Jaws
MTT343 - $24.30 set Can.

Stop block
MTT329 - $27.00 each Can.

30% discount
current stock

cam clamp acc. 

Router Sled for Cam Clamp
Comes blank, no holes

MTT331 - $56.70 Can. 

30% discount
current stock

Sold Out