|
Testimonials
"We tried Evapo-Rust on a variety of corroded parts
and were very pleased with the results. It's quick, simple,
and, unlike some other products, is non-toxic"..."Busting
rust was never easier."
STREET RODDER Magazine
September 2002 Issue
"Jack...I got the "Evapo-Rust" a day or
two ago for my WWII Japanese rifle and I must say it exceeds
all my expectations and wishes.... the rust melted off. I am
shocked and amazed. I threw in a couple of old rusty block
planes had laying around and they came out just as well.
I hope you don't mind, but I'm telling everyone I know about
this stuff."
Jack Jaquess
"The other day I met a rust remover I really liked."...
I decided to test the stuff on a surplus exhaust header pipe
that had weathered and rusted for years in my shop while waiting
for the right car to come along. I was amazed. After
about an hour in the solution the header pipe looked new.
I don't know of anything else that will do the job any better,
and most of the rust removers I'm aware of are toxic and nasty."
Jim Richardson
AUTO RESTORER MAGAZINE
July 2002 Issue
"Our Students and Instructors went nuts over your
product. I have received comments that EVAPO-RUST™
is a "superb product" and that this is the "greatest
product they have ever used". I would really like to say
thank you for sending us a gallon of your product, we really
enjoyed the product and will HIGHLY recommend EVAPO-RUST™.
Stephen G. Taylor
NRA Program Coordinator
NRA Gunsmithing Schools
"What a product! We saw your EVAPO-RUST™ remover
at the SEMA show in Las Vegas last month, bought a gallon and
gave it a try when we got home. We were amazed at how well
it worked! It was a miracle how we just submerged the rusted
spindles into your solution and after just a short time they
looked like new! We would like to order more so we can
clean rust from larger auto parts..."
Garrett Cosgrove
Speedway Specialty Product
"...Just writing to let you know you have a product that
does what it is advertised to dol. I just put the rusty
gun parts in the solution and in about an hour, when I checked
them, it was clean bare metal. Thank you"
Jr. Holmes
Jr's Gun Repair
"EVAPO-RUST™ is a union of chemistry and utility
to alleviate one of the nagging problems of restoring degraded
iron or steel parts to a usable condition. A fast, safe,
environmentally friendly solution to an age-old problem of removing
rust from ferrous materials without time consuming, tedious brushing,
scraping, blasting or dangerous acidic solutions. It's
about time!"
Joe Shalkowski
Current N.H.R.A. Record Holder
"Having been inn the racing business for over 15 years,
I have seen just about every type of new "MIRACLE"
product that has come out. But I was really proved wrong
with EVAPO-RUST™. ...Now because of EVAPO-RUST™,
we are able to reuse parts on our racecars that at one time were
junk. EVAPO-RUST™ is not corrosive to the metals,
and best of all it does not harm rubber or plastic, which is
important with many of the brake parts we need to reuse.
Mike Thomas
2001 Grand Am Cup Compact Crew Chief of the Year
"Let me stress that this is not an endorsement by
the Air Force. The Air Force does not endorse specific
products. This is simply to say that so far in our testing,
EVAPO-RUST™ has proven to be a solid product and will most
likely be one of the products indicated in our final report as
one that should be used to refurbish APW parts. ...We are
currently evaluating several chemicals to remove corrosion from
APW parts. Several have shown the ability to remove corrosion
as advertised, but so far, only EVAPO-RUST™ has shown the
ability to remove corrosion without any concerns over personal
protection during use. "
Rick Miles
Air Force Corrosion Prevention and Control Office
"I would just like to take a few minutes to tell you
how well your product works. Before using EVAPO-RUST™,
we spent 6 to 8 hours, per tool kit, cleaning and wiping down
tools (for the B-1B). This was done with wire brushes,
rags, and solvents, and not exactly the best job. Since
we've been using EVAPO-RUST™, our time is cut to about 1
to 2 hours. Most of this time is used for soaking, about
an hour, during which we accomplish other tasks. We use
30 to 45 minutes actually wiping down tools, depending on size
of kits. The amount of time saved is unbelievable.
I also don't have anyone that minds cleaning a box. Thanks
for a great product!"
Robert D. Widger, SSgt, USAF
Assistant NCOIC Sortie Support
Dyess, AFB
|
